Sewing-9

Thread Sizing

1. Metric Ticket Number system

eg if Nm 60/1 means 60m of it would weigh 1 gm.

of 120/2 means 120 m of it would weigh2 gms. In this case it would have a resultant count of 60 ( i.e. 60 gms) would weigh 1 m.

The metric ticket number of this thread based on a three fold equivalent is then three times that i.e.

Nm 80/2= Ticket Number 120
Nm 30/3 = Ticket Number 30 and so on..

2. Cotton Sewing threads are sized on the cotton ticket number system

eg. 3/60 Ne --> equivalent cT= 20--> Three fold equivalent = 60 ( Ticket Number)

3. Denier system--> Weight in gms of 9000 m of length

Thread Packages

1. Spool

a. Used for domestic sewing
b. Not suitable for delivering thread to high speed industrial machines.

2. Cops

a. Small cylinderical flangeless tubes onto which thread is cross bound for stability.
b. Lack of flanges facilitates regular offwinding from the top on sewing machines.
c. Their small diameter makes them less suited for the faster thread offtake of machines.

3. Cones

a. They contain 5000 m cross wound for stability and good offwinding performance.
b. They give troublefree thread delivery.
c. Ideal in situations where thread consumption is high.

4. Vicone- Contain any spillage

5. Large Package

a. Can hold in excess of 20000 m of spun or corespun thread

6. Container

cocoons: They are self supporting ie. centerless, thread packages.

Sewing-8

Thread Finish


The final aspect of thread construction to be studied is that of surface finish.

The most important finish is lubrication.

The requirement of a lubricating finish applied to a sewing thread is that it should produce a regular level of friction, and that for synthetic threads in particular, it should provide protection from needle heat.

Without a controlled amount of lubrication applied to threads, unacceptable damage would be inflicted on them during the sewing process which would result in thread breaks during sewing and seam breakdown in wear.

A lubricant


- Must not clog the needle eye
- should not stain
- Must allow thread to unwind evenly from the package
- Must reduce friction with m/c surfaces but without creating too much slippage
- Must not react adversly to high temperature
- Must be inexpensive
- Easy to apply to the thread during manufacturing.

Other finishes


- Mildew or rot resistant finish
- Water resistant finish
- Soil Release
- Flammability finish

Terry Towel Manufacturing Process

In addition to what I have mentioned earlier, Terry Towelling is excellently described in this blog.
Replete with pictures, this post replies succintly the various process steps in manufacturing terry towel.

Sewing-7

Sewing Threads

Threads can be

Spun


Threads made from spun yarn have good sewing performance, good dimensional stability and good stitch locking properties in the seam due to their fibrous surface.

Monofilament


One filament of large size. It is harsh on machine and rather inflexible because the cross sectional shape never varies as it would with multifilaments.

Its cut ends are harsh on the wearer. It has virtually no seam grip and stitches tend to unravel easily.

Its good advantage is a translucency which reduces the need for shade matching.

Multifilament Form


Their fineness enables larger thread packages to be used, thus saving operator time changing them.

Corespun


In this a continuous multifilament core is wrapped around a sheath of spun fiber, two or three of these yarns are then plied together.

The majority of these corespun threads consist of a polyester core and a cotton cover.