Textile and Comfort

People have always been interested in the connection between clothing and physical well-being.Comfort has its physiological, physical-chemical and psychological components. Major components in case of textiles are Warmth, Absorbing capacity and humidity, General comfort , Cloth convenience , Skin perception , Weight and Softness. Out of these major part of comfort is directly related to the body temperature. Thus any clothing can be measured on comfort by the fact that how well it can regulate the temperature of the body. Sweating is the most effective way the human body has of cooling down. How well can a clothing provide comfort depends upon (among other factors) how well it can handle sweating.

The most effective cooling is achieved by sweat evaporating directly on the skin. Thus any clothing that behaves closest to the skin is comfortablee. The ability of a textile to transport perspiration in the form of vapour through itself and out to the exterior is generally referred to as its breathability. It is incorrect to use the terms breathability (or resistance to water vapour) and air permeability interchangeably, because low air permeability does not in itself result in lower breathability. The best example of this is modern wind- and waterproof membranes, which allow very little air to permeate in from outside (windproof), but still allow evaporated perspiration to pass through from the inside.

Fiber characteristics influence breathability the most. However contrary to popular belief,synthetic fibers are not always bad in terms of comfort. If textiles made from synthetic fibres were properly designed, they could not only offer the same heat and moisture management qualities as natural fibres but even exceed them.For example in in double faced clothings, layers of natural and synthetic fibres were combined, yet kept separate. The synthetic fibres of the "double face material" were next to the skin and conducted perspiration quickly and efficiently away from the body and into the outer cotton layer. In combination, the two materials were far more comfortable than cotton, because of the drier feeling on the skin."

There are some interesting developments in getting comfort characteristcs of fabrics they include a gradual variation in the fineness of the fibres and yarns from the inner surface of the textile to the outer surface. It improves moisture management; because the resulting narrowing of the capillaries (denier gradient) means that the moisture can be transported away from the skin really effectively. Other measeures include integrating electrical and electronic components such as heating or cooling elements. The latest battery technology and innovative methods of processing and wiring.


Sources:

http://www.innovationintextiles.com/articles/732.php

http://www.technica.net/NT/NT3/comfort_clothing.htm
 

Now that you've finished reading this post, what are you going to do? You should join the Forum.

What is Eli Twist Yarn

EliTwist Yarn: A Compact Route to Two-Ply Yarn Production

In yarn manufacturing, a small change in spinning technology can create a major difference in yarn appearance, strength, hairiness, fabric performance, and production economics. One such development is EliTwist yarn, associated with Suessen’s compact spinning technology.

EliTwist is not just another yarn name. It represents a specific way of producing a two-ply compact yarn directly on the ring spinning frame, instead of first making single yarns and then twisting them separately in a later process such as TFO twisting. In that sense, EliTwist combines the advantages of compact spinning and doubling/twisting in one integrated route.

EliTwist yarn formation: two rovings are drafted, compacted, and spin-twisted into one compact two-ply yarn. This is a creative representation, actual process may vary

What is EliTwist yarn?

EliTwist yarn is a compact spin-twisted yarn produced using Suessen’s EliTe compact spinning system. In conventional yarn manufacturing, if a two-ply yarn is required, two single yarns are first produced and then twisted together in a separate process. EliTwist changes this route.

In EliTwist, two rovings are fed into one spinning position. These rovings are drafted separately, compacted, and then combined by twist. The result is a yarn that behaves like a two-ply yarn but is produced directly on the ring spinning frame.

EliTwist = compact yarn + doubled yarn character + direct production on ring frame.

This is why EliTwist is interesting both technically and commercially. It aims to give the spinner the quality advantages of doubled yarn while reducing the need for separate doubling and twisting operations.

How EliTwist yarn is produced

The EliTwist process begins with two rovings. These two rovings pass through the drafting system separately. After drafting, the fibre strands enter a compacting zone. In this zone, the fibres are condensed before twist insertion.

The compacting zone is important because it reduces the spinning triangle. In normal ring spinning, fibres at the edge of the strand may not be fully integrated into the yarn body. These edge fibres become hairiness, fly, or weakly bound surface fibres. In compact spinning, the fibre strand is condensed before twist insertion, so more fibres become part of the main yarn body.

In EliTwist, this compacting principle is applied to two drafted fibre strands. The two compacted strands are brought together and twisted to form a spin-twisted compact yarn. The structure becomes cleaner, more compact, and more controlled than an ordinary ring-spun yarn.

Why the spinning triangle matters

The spinning triangle is the small triangular zone between the front roller nip and the point where twist is fully inserted into the yarn. This zone may look small, but it has a major effect on yarn quality.

In ordinary ring spinning, the spinning triangle allows some fibres to remain loose or poorly integrated. This leads to higher hairiness and lower fibre utilization. In compact spinning, the fibre strand is condensed before twisting, so the spinning triangle becomes smaller.

Source : www.suessen.com

Effect	Result
Better fibre control	Lower hairiness
More fibres inside yarn body	Higher strength
Compact yarn structure	Smoother yarn surface
Better yarn roundness	Improved fabric appearance
Lower loose fibres	Less lint and fly

EliTwist applies this compacting advantage while also creating a two-ply-like yarn structure.

Comparison of ordinary ring spinning and compact spinning: a smaller spinning triangle helps reduce hairiness. Creative representation- may differ from actual process

EliTwist versus conventional TFO yarn

To understand EliTwist properly, it helps to compare it with conventional TFO yarn. In a traditional route, two single yarns are produced first. Then these yarns are twisted together on a TFO machine. This gives a conventional two-ply yarn. TFO yarns are widely used because they offer better strength, balance, and fabric performance than single yarns.

EliTwist tries to achieve many of these two-ply advantages directly at the spinning frame. This gives it a process advantage because it can reduce separate doubling and twisting operations.

Point of comparison	Conventional TFO yarn	EliTwist yarn
Production route	Single yarn spinning + separate twisting	Two rovings spun and twisted directly
Process length	Longer	Shorter
Yarn surface	Depends on single yarn quality and twisting	Compact and smooth
Hairiness	Generally higher than compact EliTwist	Lower
Strength	Good	Often higher in studies
Abrasion resistance	Can be better in some cases	May be lower than TFO in some studies
Production economy	Additional process required	Potentially more economical

The important point is that EliTwist is not merely a substitute for TFO in every situation. It has its own structural identity. It gives many advantages, especially in hairiness, compactness, smoothness, and tensile properties, but TFO may still perform better in certain abrasion-related conditions.

Suessen’s claimed advantages of EliTwist

Suessen presents EliTwist as a high-quality compact spin-twisted yarn system. The major advantages claimed for EliTwist include high yarn strength, low hairiness, compact cross-section, smooth yarn surface, good evenness, resistance to yarn slippage, abrasion resistance, and process economy.

Advantage	Practical meaning
High yarn strength	Better performance during weaving and processing
Low hairiness	Cleaner yarn and fabric surface
Compact cross-section	Better yarn roundness and appearance
Smooth yarn surface	Improved handle and fabric clarity
Good evenness	Better visual uniformity
Resistance to yarn slippage	Useful in woven structures
Abrasion resistance	Better durability in some applications
Process economy	Avoids separate doubling and twisting route

For mills, the economic attraction is also important. If a yarn with doubled-yarn-like performance can be produced without a separate twisting process, the saving in time, handling, machinery, energy, and labour can be meaningful.

What research papers say about EliTwist yarn

Research on EliTwist yarn is not as large as research on ring, rotor, air-jet, or compact yarns, but several useful papers exist. These papers mainly compare EliTwist with TFO yarn, compact doubled yarn, regular doubled yarn, and other spinning systems.

The research themes are fairly consistent. Most studies examine yarn hairiness, tensile strength, elongation, friction, abrasion resistance, fabric behaviour, moisture transport, elastic recovery, and sewing-thread performance.

1. Comparative assessment of EliTwist and TFO yarns

One of the most useful studies compares EliTwist yarn with conventional ring-spun TFO yarns. This paper studies properties such as mass irregularity, imperfections, hairiness, diameter, tenacity, elongation, coefficient of friction, and abrasion resistance.

The findings are interesting because they show that EliTwist is superior in several properties, but not in every property.

Property	EliTwist compared with TFO
Mass irregularity	More or less similar
Imperfections	Similar or sometimes slightly higher
Hairiness	Lower
Yarn diameter	Lower / more compact
Tenacity	Higher
Breaking extension	Higher
Coefficient of friction	Lower
Abrasion resistance	Lower than TFO in that study

The lower hairiness and lower diameter make sense because EliTwist is based on compact spinning. The higher tenacity and breaking extension are also linked to better fibre integration. More fibres are held inside the yarn body and contribute to load bearing.

However, the finding on abrasion resistance is important. TFO yarn performed better in abrasion resistance in that particular study. This may be because the fibres in conventional doubled yarn are trapped differently at the interface of the two yarns, giving better resistance to repeated rubbing.

Balanced conclusion: EliTwist is generally cleaner, smoother, more compact, and stronger, but TFO may still be better where abrasion resistance is the dominant requirement.

2. Optimization of process parameters in EliTwist yarn

Another research direction studies the effect of process parameters on EliTwist yarn quality. In EliTwist, two important variables are feed roving distance and negative suction pressure. These parameters affect how the fibre strands are compacted and how effectively fibres are integrated into the yarn structure.

If the roving distance is not suitable, the two drafted strands may not combine optimally. If suction pressure is too low, compacting may be inadequate. If suction pressure is excessive, it may affect fibre movement, energy consumption, and process stability.

Parameter affected	Meaning
Yarn fineness	Whether the yarn count remains controlled
Rkm / strength	Load-bearing capacity
Elongation percentage	Stretch before break
Unevenness percentage	Mass variation
Imperfections	Thick places, thin places, neps
Hairiness	Surface fibre protrusion

This is a useful reminder that EliTwist quality is not automatic. The technology gives a strong base, but the final yarn quality depends on machine settings, fibre properties, twist, count, roving preparation, and process control.

3. Fabrics made from EliTwist and other doubled yarns

Some studies compare fabrics made from EliTwist yarn with fabrics made from combed compact doubled yarn and regular combed doubled yarn. The general observation is that EliTwist fabrics often show better overall characteristics. This can include better compactness, appearance, fabric weight, thickness, air permeability, and moisture management depending on the yarn and fabric construction used.

At the fabric level, the benefit of EliTwist comes from its yarn structure. A smoother and less hairy yarn can produce a cleaner fabric surface. Better yarn strength can improve weaving performance. A compact yarn structure can also influence fabric thickness, cover, handle, and comfort.

However, one should be careful. Fabric performance depends not only on yarn type but also on yarn count, twist level, fabric structure, fibre blend, and finishing.

Performance comparison map: EliTwist often improves hairiness, compactness, friction, and tensile strength, while TFO may perform better in some abrasion cases. Creative Representation

4. EliTwist as sewing thread

Another interesting research area is the use of EliTwist yarn as sewing thread. Sewing thread requires high strength, low friction, low hairiness, good abrasion behaviour, and stable performance at high machine speeds.

Research comparing EliTwist sewing thread with conventional sewing thread reports encouraging results. EliTwist sewing thread showed lower hairiness, lower friction, and higher tensile strength. Low hairiness is useful in sewing because hairy thread can generate lint, friction, and needle heating. Higher tensile strength can reduce thread breakage. Lower friction can help smoother passage through guides, needle eye, and fabric.

This suggests that EliTwist may have potential beyond ordinary weaving or knitting yarns.

5. Elastic recovery of polyester-cotton EliTwist yarns

Research has also studied elastic recovery properties of polyester-cotton blended EliTwist yarns. This is important because yarn behaviour changes significantly with fibre blend.

Polyester has better elastic recovery than cotton. Cotton tends to deform more and recover less after extension. Therefore, polyester-cotton blend ratio influences immediate recovery, delayed recovery, and permanent deformation.

Variable	Effect
Polyester/cotton blend ratio	Higher polyester generally improves recovery
Extension rate	Affects deformation behaviour
Extension amplitude	Higher extension may increase permanent deformation
Yarn structure	Influences fibre movement and recovery

This means EliTwist yarn cannot be judged in isolation. A 100% cotton EliTwist yarn, a polyester-cotton EliTwist yarn, and a 100% polyester EliTwist yarn may behave differently.

6. Moisture transport behaviour of EliTwist knitted fabrics

Some studies also examine moisture transport in knitted fabrics made from EliTwist yarn. Moisture management is important for comfort, especially in apparel fabrics.

Yarn structure affects how moisture moves through fabric. Hairiness, compactness, capillary spaces, fibre type, twist, and fabric construction all influence wetting and transport. EliTwist yarns, because of their compact structure and smoother surface, may affect moisture spreading and transport differently from ring, rotor, or conventional doubled yarns.

In knitted fabrics, this can influence wearer comfort, drying, and sweat movement. Again, fibre composition matters greatly. Cotton, polyester, and blends behave differently in moisture management.

Why EliTwist yarn has lower hairiness

Hairiness is one of the most important advantages of EliTwist. In yarn testing, hairiness refers to fibres protruding from the yarn surface. Higher hairiness can affect fabric appearance, pilling tendency, lint generation, processing performance, and dyeing appearance.

EliTwist reduces hairiness because of compact spinning. Before twist is inserted, the fibre strand is condensed. This allows edge fibres to be captured inside the yarn structure. In ordinary ring yarn, some fibres remain outside the main yarn body. In EliTwist, more fibres are integrated. The result is a smoother yarn surface.

Area	Benefit
Weaving	Less fly and fewer weak protruding fibres
Knitting	Cleaner yarn path
Fabric appearance	Smoother surface
Dyeing and finishing	More uniform surface behaviour
Sewing thread	Lower friction and lint

Why EliTwist yarn can be stronger

Strength improves when more fibres contribute to load bearing. In a poorly integrated yarn, some fibres are present but do not fully share the load. They may slip, protrude, or break early.

In EliTwist, compacting improves fibre alignment and integration. More fibres become part of the yarn body. This improves tenacity and breaking extension. The doubled structure also contributes to performance. Since two strands are involved, the yarn has a balanced and stable structure. The compact nature of the yarn improves the efficiency of fibre packing.

In simplified form, yarn strength may be understood as:

\( \text{Yarn Strength} \propto \text{Fibre Strength} \times \text{Fibre Integration} \times \text{Twist Efficiency} \)

EliTwist mainly improves the fibre integration and twist efficiency part of this relationship.

Where EliTwist yarn may be useful

EliTwist yarn can be useful in applications where a clean, strong, compact, two-ply-like yarn is needed. For shirting and fine fabrics, low hairiness and smooth appearance are especially valuable. For sewing threads, low friction and strength are important. For woven fabrics, strength and reduced hairiness can improve loom performance.

Application	Why EliTwist helps
Shirting fabrics	Smooth surface, low hairiness, good strength
Fine woven fabrics	Better clarity and compactness
High-quality knitting yarns	Cleaner yarn surface
Sewing threads	Low friction and higher strength
Polyester-cotton blends	Better performance depending on blend
Premium apparel fabrics	Improved appearance and handle
Weaving yarns	Fewer breaks and cleaner processing

Limitations and cautions

EliTwist should not be treated as a miracle yarn. It has advantages, but its suitability depends on the end use. Some studies suggest that TFO yarn can perform better in abrasion resistance. Also, EliTwist quality depends heavily on machine settings such as suction pressure and roving distance.

Caution	Explanation
Abrasion resistance may not always be superior	Some studies found TFO better in abrasion resistance
Settings matter	Roving distance and suction pressure affect quality
Fibre blend matters	Cotton, polyester, and blends behave differently
Fabric construction matters	Yarn advantage may change at fabric level
Cost-benefit must be calculated	Machine investment and savings must be compared
Not all doubled yarns are equal	TFO and EliTwist have different structures

The best approach is not to ask, “Is EliTwist better?” but rather: for this fibre, count, twist, fabric construction, and end use, does EliTwist give the required performance more economically?

List of useful research papers and articles

Below is a practical reading list for anyone who wants to study EliTwist yarn in more detail.

No.	Paper / article	Main focus
1	Comparative assessment of Eli-Twist and TFO yarns	Comparison of EliTwist and conventional TFO yarn properties
2	Optimization of Process Parameters in Eli-Twist Yarn	Effect of roving distance and suction pressure
3	Comparative Analysis of Fabrics Made from Eli-Twist and Other Doubled Yarns	Fabric-level comparison
4	Elastic recovery properties of polyester-cotton blended Eli-Twist yarns	Recovery behaviour of blended EliTwist yarns
5	Eli-Twist sewing thread: an alternative to conventional sewing thread	EliTwist as sewing thread
6	Effect of Yarn Structure on Yarn and Fabric Properties Produced using EliTwist Yarn and TFO Yarn	Yarn and fabric structure comparison
7	Moisture transport behaviour of Eli-Twist knitted fabric	Comfort and moisture transport
8	EliTwist: Compact yarn on continuous spinning machine	Technical explanation of EliTwist system
9	Reflections on the spinning of two-ply yarns with EliTwist CompactSet	Early technical discussion of EliTwist spinning

Final understanding

EliTwist yarn is best understood as a compact spin-twisted two-ply yarn produced directly on the ring spinning frame. It combines compact spinning with the idea of doubled yarn formation. Its main strengths are low hairiness, smooth surface, compact structure, better tensile properties, and potential process economy.

Research generally supports the claim that EliTwist yarn has lower hairiness, lower friction, better compactness, and higher tensile performance compared with conventional TFO yarns. However, TFO may still perform better in some abrasion-related situations. Therefore, EliTwist should be selected based on the specific performance requirement of the final fabric or product.

EliTwist is valuable when a fabric or thread needs the strength and appearance benefits of doubled yarn, but the spinner wants a shorter, cleaner, and potentially more economical compact-spinning route.

General disclaimer

This article is intended for educational and technical understanding only. The performance of EliTwist yarn may vary depending on fibre type, yarn count, twist level, roving quality, suction pressure, machine condition, fabric construction, finishing process, and end-use requirement. Before making industrial or commercial decisions, mills and buyers should conduct controlled trials, laboratory testing, and cost-benefit analysis under their own production conditions.

Queries from the Readers

I am normally asked questions from readers, the exact answer to which I am unable to provide.

I have decided to post these questions so that you can help, by giving answer in the comments.

Here are two of the questions:

1. Using Fiber Reactive Dyes on Silk:

I am a Silk Artist and work with pure silk (silk habotai). I've used silk paints all this time and now have decided to use dyes instead. However 'Silk Dyes' are not available where I live and therefore I use Fibre Reactive Dyes. Firstly I used Reactive Dyes with Soda Ash according to the cold water method and found out that it takes off the sheen of the silk and also that it is not very practical for the 'painting' (direct application' method). So I followed the instructions given in Paula Brich's website and used reactive dyes as an acid dye by heating with vinegar. The effect is really wonderful and the colours are so vibrant. but the problem is with the wash fastness: colour washes off even after 10 washes. I would very much appreciate if you could shed some light on how I could use fibre reactive dyes as acid dyes on silk effectively. 2. Getting the Exact Blend in Polyester and Cotton I am government supplier so i have to give excat specification fabric as per tender.I have to give Blend 65% Polyester & 35% Cotton or PV Fabric & width 47" Weight 90gram+ per meter. But the problem i am facing is in India mostly 70:30 P/C Yarn is available so i cant supply. So please suggest what i should use in warp & weft(eg:100%cotton warp & weft 80:20 PC)to maintain average blend excat 65:35 P/C or P/V whichever is cost effective at both grey & processing stage. So i just want blend 65:35 P/C or P/V weight 90gram+ as per width 47". Count& rid/pick doesnt matter. So please suggest as soon as possible which is cheapest way. Incidentally it is the 400th Post. I thank you all for the support and encouragement you have provided

Now that you've finished reading this post, what are you going do? You should go join the Forum.

Common Parameters measured in Silk Yarn

Common Parameters measured in a Silk Yarn: An Example

Direction of Twist: S
Average Twists Per Metre: 691.4 Turns
C.V.Twist: 3.09 %
Percentage of Twist Deviation: 1.23 %
C.V.Size: 4.18%
Cleanness: 98.2 Percentage
Neatness: 96.15Percentage
Tenacity: 3.89 Grans/Denier
Elongation: 19.2%
Average Moisture Regain: 10.99%
Grade:***
Circumference of the Swift:*** Inches
Skein Weight:  about 500 grams

To know more about these tests you can click here.

General Denier Qualities in Mulberry Silk

14/16,16/18,18/20,20/22

General Norms for Organzine Twist

z800- Z direction Twist, No. of twists per meter-800
s850- s direction twist, No of twists per meter- 850


Now that you've finished reading this post, what are you going do? You should go join the Forum.