Wednesday 25 November 2009

Fiber Identification - Burning Test- Man-made Fibers





All viscose including High Wet Modulus scorch and ignite quickly when brought near the flame. Like cotton they burn quickly with yellow flame when in the flame. When removed from the flame they continue to burn. There is no afterglow unlike cotton. The smell is that of burning paper. They leave a light gray and feathery ash.

Acetate Rayon  ( And Triacetate Rayon)

When brought near the flame, it fuses away from flame turning black. When in the flame, it flames quickly. The fabric puckers, sputters and melts. It drips like burning tar. When removed from the flame, it continues to burn and melt. It smells like vinegar. It leaves a brittle hard, irregular black ash which is difficult to crush.


3D diagram showing the variants nylon 6 and ny...Image via Wikipedia








Nylon fuses and shrinks away from the flame when brought near the flame. In flame, it burns slowly without melting. When removed from flame the flame diminishes and tends to die out. It has somewhat pungent odor. It leaves a hard, round, tough and gray bead.


When brought near the flame, it shrinks away from the flame. When in the flames it puckers and chars. When removed from flame, it extinguishes by itself. It has no smell and it leaves a hard black bead.





Scanning electron microscope image of a bend i...Image via Wikipedia

Polyester fuses and shrinks away from flame. When in flame, it burns slowly with melting. When removed from the flame, it burns with difficulty. It has slightly sweetish smell. It leaves a hard round brittle, black bead.


Orlon, Acrilan and Creslan and Zefran fuse and melt away from Flame when brought near the flame. When in flame Orlon flames rapidly. The fiber puckers, sputters and melts. Acrilan flames rapidly and melts. Creslan flames and melts and Zefran sputters slightly and flames. When removed flame all of acrylics continue to burn and melt. Orlon has a slightly burning meat-like smell. Acrilan has a buring steak smell. Creslan has sharp sweet smell and Zefran has a turmeric like smell. Orlon, Acrilan and Cresla have hard, brittle and irregular black bead. Zefran has irregular black ash that can be crushed easily.

Modacrylics

Verel and SEF fuse and shrink away from the flame when approached near a flame. When in flame, Verel burns very slowly with melting. SEF shrinks, melts and smolders. When removed from flames, all modacrylics are self extinguishing. Verel has a gunpower smell whereas SEF has a sharp sweet smell. Verel leaves a hard and irregular black bead whereas SEF leaves a hard and irregular black bead.


Fuses but doesn’t shrinks away from the flame when approached near the flame. When in flame, it burns with melting. It has an acrid smell. It leaves a soft, fluffy black bead.

Now that you've finished reading this post, what are you going do? You should go join the Forum.


Reblog this post [with Zemanta]

Related Posts Plugin for WordPress, Blogger...

Total Pageviews